Loading...
首页 > CCIE系列认证> 路由和交换(CCIE) > 实验考试4.0 > 文档

CCIE路由和交换实验试大纲v4.0

创建于: 2013-12-06 19:27:41          

 

 CCIE Routing and Switching Lab Exam version 4.0

Exam Description: The Cisco CCIE® Routing and Switching Lab Exam version 4.0 is an 8-hour hands-on test that will validate that professionals have the expertise to: configure, validate, and troubleshoot complex enterprise network infrastructure; understand how infrastructure components interoperate; and translate functional requirements into specific device configurations.

The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

21% 1.0 Implement Layer 2 Technologies

1.1 Implement STP

1.1.a IEEE 802.1D

1.1.b IEEE 802.1W

1.1.c IEEE 802.1S

1.1.d Loop guard

1.1.e Root guard

1.1.f BPDU guard

1.1.g Storm control

1.1.h Unicast flooding

1.1.i Port roles, failure propagation, and loop guard operation

1.2 Implement VLAN and VTP

1.3 Implement trunk and trunk protocols, EtherChannel, and load balancing

1.4 Implement Ethernet technologies

1.4.a Speed and duplex

1.4.b Ethernet, Fast Ethernet, and Gigabit Ethernet

1.4.c PPPoE

1.5 Implement SPAN, RSPAN, and flow control

1.6 Implement Frame Relay

1.6.a LMI

1.6.b Traffic shaping

1.6 c Full mesh

1.6 d Hub and spoke

1.6.e DE

1.7 Implement HDLC and PPP 2013 Cisco Systems, Inc. This document is Cisco Public. Page 2

 

18% 2.0 Implement IPv4

2.1 Implement IPv4 addressing, subnetting, and VLSM

2.2 Implement IPv4 tunneling and GRE

2.3 Implement IPv4 RIPv2

2.4 Implement IPv4 OSPF

2.4.a Standard OSPF areas

2.4.b Stub area

2.4.c Totally stubby area

2.4.d NSSA

2.4.e Totally NSSA

2.4 f LSA types

2.4.g Adjacency on a point-to-point and on a multi-access network

2.4.h OSPF graceful restart

2.5 Implement IPv4 EIGRP

2.5.a Best path

2.5.b Loop-free paths

2.5.c EIGRP operations when alternate loop-free paths are available and not available

2.5.d EIGRP queries

2.5.e Manual summarization and auto-summarization

2.5.f EIGRP stubs

2.6 Implement IPv4 BGP

2.6.a Next hop

2.6.b Peering

2.6 c IBGP and EBGP

2.7 Implement policy routing

2.8 Implement Cisco PfR and Cisco OER

2.9 Implement filtering, route redistribution, summarization, synchronization, attributes, and other advanced features

4% 3.0 Implement IPv6

3.1 Implement IPv6 addressing and different addressing types

3.2 Implement IPv6 neighbor discovery

3.3 Implement basic IPv6 functionality protocols

3.4 Implement tunneling techniques

3.5 Implement OSPFv3 2013 Cisco Systems, Inc. This document is Cisco Public. Page 3

 

3.6 Implement EIGRPv6

3.7 Implement filtering and route redistribution

4% 4.0 Implement MPLS Layer 3 VPNs

4.1 Implement MPLS

4.2 Implement Layer 3 VPNs on provider edge (PE), provider (P), and customer edge (CE) routers

4.3 Implement VRF and Multi-VRF Customer Edge (VRF-Lite)

6% 5.0 Implement IP Multicast

5.1 Implement PIM sparse mode

5.2 Implement MSDP

5.3 Implement inter-domain multicast routing

5.4 Implement PIM Auto-RP, unicast RP, and BSR

5.5 Implement multicast tools, features, and source-specific multicast

5.6 Implement IPv6 multicast, PIM, and related multicast protocols such as MLD

5% 6.0 Implement Network Security

6.1 Implement access lists

6.2 Implement zone-based firewall

6.3 Implement uRPF

6.4 Implement IP source guard

6.5 Implement AAA (configuring the AAA server is not required, only the client-side is configured)

6.6 Implement CoPP

6.7 Implement Cisco IOS Firewall

6.8 Implement Cisco IOS IPS

6.9 Implement SSH

6.10 Implement IEEE 802.1X 2013 Cisco Systems, Inc. This document is Cisco Public. Page 4

 

6.11 Implement NAT

6.12 Implement routing protocol authentication

6.13 Implement device access control

6.14 Implement security features

5% 7.0 Implement Network Services

7.1 Implement HSRP

7.2 Implement GLBP

7.3 Implement VRRP

7.4 Implement NTP

7.5 Implement DHCP

7.6 Implement WCCP

5% 8.0 Implement QoS

8.1 Implement MQC

8.1.a NBAR

8.1.b CBWFQ, MDRR, and LLQ

8.1.c Classification

8.1.d Policing

8.1.e Shaping

8.1.f Marking

8.1.g WRED and RED

8.1.h Compression

8.2 Implement Layer 2 QoS: WRR, SRR, and policies

8.3 Implement LFI for Frame Relay

8.4 Implement generic traffic shaping

8.5 Implement RSVP

8.6 Implement Cisco AutoQoS

26% 9.0 Troubleshoot a Network

9.1 Troubleshoot complex Layer 2 network issues

9.2 Troubleshoot complex Layer 3 network issues

9.3 Troubleshoot a network in response to application problems 2013 Cisco Systems, Inc. This document is Cisco Public. Page 5

 

9.4 Troubleshoot network services

9.5 Troubleshoot network security

6% 10.0 Optimize the Network

10.1 Implement syslog and local logging

10.2 Implement IP SLA

10.3 Implement NetFlow

10.4 Implement SPAN, RSPAN, and RITE

10.5 Implement SNMP

10.6 Implement Cisco IOS EEM

10.7 Implement RMON

10.8 Implement FTP

10.9 Implement TFTP

10.10 Implement TFTP server on router

10.11 Implement SCP

10.12 Implement HTTP and HTTPS

10.13 Implement Telnet

评论 (1)