从2011年1月17日开始, CCIE学习小组会进行6个月学习期,请参阅以下学习流程:
欢迎大家积极参与!!!!
声明: 以下学习计划只作参考,并不保证任何考试结果。实际的学习进度和结果根据个人情况而定。
(按照学习流程定期更新文档)
编号 | 知识点 | 学习时间 (天) | 学习文档 |
1.00 | Implement Layer 2 Technologies | 13 | |
1.10 | Implement Spanning Tree Protocol (STP) | 5 |
|
(a) 802.1d | 配置指南 | ||
(b) 802.1w | 配置指南 | ||
(c) 801.1s | 配置指南 | ||
(d) Loop guard | 配置指南 | ||
(e) Root guard | 配置指南 | ||
(f) Bridge protocol data unit (BPDU) guard | 配置指南 | ||
(g) Storm control | 配置指南 | ||
(h) Unicast flooding | 配置指南 | ||
![]() | |||
1.20 | Implement VLAN and VLAN Trunking Protocol (VTP) | 2 |
|
1.30 | Implement trunk and trunk protocols, EtherChannel, and load-balance | 1 | 配置指南 |
1.40 | Implement Ethernet technologies | 1 | |
(a) Speed and duplex | |||
(b) Ethernet, Fast Ethernet, and Gigabit Ethernet | |||
(c) PPP over Ethernet (PPPoE) | |||
1.50 | Implement Switched Port Analyzer (SPAN), Remote Switched Port Analyzer (RSPAN), and flow control | 1 | 配置指南 |
1.60 | Implement Frame Relay | 2 | 配置指南 |
(a) Local Management Interface (LMI) | |||
(b) Traffic shaping | |||
(c) Full mesh | |||
(d) Hub and spoke | |||
(e) Discard eligible (DE) | |||
1.70 | Implement High-Level Data Link Control (HDLC) and PPP | 1 | |
2.00 | Implement IPv4 | 36 | |
2.10 | Implement IP version 4 (IPv4) addressing, subnetting, and variable-length subnet masking (VLSM) | 2 | 推荐文档 |
2.20 | Implement IPv4 tunneling and Generic Routing Encapsulation (GRE) | 1 | 配置指南 |
2.30 | Implement IPv4 RIP version 2 (RIPv2) | 2 | 配置指南 |
2.40 | Implement IPv4 Open Shortest Path First (OSPF) | 10 | 配置指南 |
(a) Standard OSPF areas | 命令参考 | ||
(b) Stub area | |||
(c) Totally stubby area | |||
(d) Not-so-stubby-area (NSSA) | |||
(e) Totally NSSA | |||
(f) Link-state advertisement (LSA) types | |||
(g) Adjacency on a point-to-point and on a multi-access network | |||
(h) OSPF graceful restart | |||
2.50 | Implement IPv4 Enhanced Interior Gateway Routing Protocol (EIGRP) | 5 | 《TCPIP路由技术(第一卷)》第7章 |
(a) Best path | 配置指南 | ||
(b) Loop-free paths | 命令参考 | ||
(c) EIGRP operations when alternate loop-free paths are available, and when they are not available | |||
(d) EIGRP queries | |||
(e) Manual summarization and autosummarization | |||
(f) EIGRP stubs | |||
2.60 | Implement IPv4 Border Gateway Protocol (BGP) | 10 | 《TCP/IP路由技术(第二卷)》第2章 |
(a) Next hop | 《TCP/IP路由技术(第二卷)》第3章 | ||
(b) Peering | 配置指南 | ||
(c) Internal Border Gateway Protocol (IBGP) and External Border Gateway Protocol (EBGP) | 命令参考 | ||
2.70 | Implement policy routing | 1 | 配置指南 |
2.80 | Implement Performance Routing (PfR) and Cisco Optimized Edge Routing (OER) | 2 | 配置指南 |
2.90 | Implement filtering, route redistribution, summarization, synchronization, attributes, and other advanced features | 3 | |
3.00 | Implement IPv6 | 15 | 配置指南 |
3.10 | Implement IP version 6 (IPv6) addressing and different addressing types | 2 | 命令参考 |
3.20 | Implement IPv6 neighbor discovery | 1 | |
3.30 | Implement basic IPv6 functionality protocols | 1 | |
3.40 | Implement tunneling techniques | 1 | |
3.50 | Implement OSPF version 3 (OSPFv3) | 5 | |
3.60 | Implement EIGRP version 6 (EIGRPv6) | 4 | |
3.70 | Implement filtering and route redistribution | 1 | |
4.00 | Implement MPLS Layer 3 VPNs | 17 | 配置指南 |
4.10 | Implement Multiprotocol Label Switching (MPLS) | 5 | 命令参考 |
4.20 | Implement Layer 3 virtual private networks (VPNs) on provider edge (PE), provider (P), and customer edge (CE) routers | 10 | 帧模式MPLS操作 |
4.30 | Implement virtual routing and forwarding (VRF) and Multi-VRF Customer Edge (VRF-Lite) | 2 | MPLS/VPN 技术架构的运作方式 |
5.00 | Implement IP Multicast | 15 | 配置指南 |
5.10 | Implement Protocol Independent Multicast (PIM) sparse mode | 6 | 命令参考 |
5.20 | Implement Multicast Source Discovery Protocol (MSDP) | 1 | |
5.30 | Implement interdomain multicast routing | 2 | |
5.40 | Implement PIM Auto-Rendezvous Point (Auto-RP), unicast rendezvous point (RP), and bootstrap router (BSR) | 1 | |
5.50 | Implement multicast tools, features, and source-specific multicast | 3 | |
5.60 | Implement IPv6 multicast, PIM, and related multicast protocols, such as Multicast Listener Discovery (MLD) | 2 | |
6.00 | Implement Network Security | 12 | 命令参考 |
6.01 | Implement access lists | 1 | 配置指南 |
6.02 | Implement Zone Based Firewall | 1 | |
6.03 | Implement Unicast Reverse Path Forwarding (uRPF) | 0.5 | 配置指南 |
6.04 | Implement IP Source Guard | 1 | |
6.05 | Implement authentication, authorization, and accounting (AAA) (configuring the AAA server is not required, only the client-side (IOS) is configured) | 1 | 配置指南 |
6.06 | Implement Control Plane Policing (CoPP) | 1 | 配置指南 |
6.07 | Implement Cisco IOS Firewall | 1 | |
6.08 | Implement Cisco IOS Intrusion Prevention System (IPS) | 1 | 配置指南 |
6.09 | Implement Secure Shell (SSH) | 0.5 | 配置指南 |
6.10 | Implement 802.1x | 1 | |
6.11 | Implement NAT | 1 | |
6.12 | Implement routing protocol authentication | 0.5 | |
6.13 | Implement device access control | 0.5 | |
6.14 | Implement security features | 1 | |
7.00 | Implement Network Services | 8 | |
7.10 | Implement Hot Standby Router Protocol (HSRP) | 1 | 配置指南 |
7.20 | Implement Gateway Load Balancing Protocol (GLBP) | 1 | 配置指南 |
7.30 | Implement Virtual Router Redundancy Protocol (VRRP) | 1 | 配置指南 |
7.40 | Implement Network Time Protocol (NTP) | 2 | 配置指南 |
7.50 | Implement DHCP | 2 | 配置指南 |
7.60 | Implement Web Cache Communication Protocol (WCCP) | 1 | 配置指南 |
8.00 | Implement Quality of Service (QoS) | 16 | 配置指南 |
8.10 | Implement Modular QoS CLI (MQC) | 10 | CCIE Routing and Switching Certification Guide (Fourth Edition) 第16章 |
(a) Network-Based Application Recognition (NBAR) | |||
(b) Class-based weighted fair queuing (CBWFQ), modified deficit round robin (MDRR), and low latency queuing (LLQ) | |||
(c) Classification | |||
(d) Policing | |||
(e) Shaping | |||
(f) Marking | |||
(g) Weighted random early detection (WRED) and random early detection (RED) | |||
(h) Compression | |||
8.20 | Implement Layer 2 QoS: weighted round robin (WRR), shaped round robin (SRR), and policies | 3 | |
8.30 | Implement link fragmentation and interleaving (LFI) for Frame Relay | 1 | |
8.40 | Implement generic traffic shaping | 1 | |
8.50 | Implement Resource Reservation Protocol (RSVP) | 1 | |
8.60 | Implement Cisco AutoQoS | ||
9.00 | Troubleshoot a Network | 20 | |
9.10 | Troubleshoot complex Layer 2 network issues | 5 | |
9.20 | Troubleshoot complex Layer 3 network issues | 5 | |
9.30 | Troubleshoot a network in response to application problems | 5 | |
9.40 | Troubleshoot network services | 2 | |
9.50 | Troubleshoot network security | 3 | |
10.00 | Optimize the Network | 20 | |
10.01 | Implement syslog and local logging | 1 | |
10.02 | Implement IP Service Level Agreement SLA | 2 | 配置指南 |
10.03 | Implement NetFlow | 1 | 配置指南 |
10.04 | Implement SPAN, RSPAN, and router IP traffic export (RITE) | 1 | 配置指南 |
10.05 | Implement Simple Network Management Protocol (SNMP) | 2 | 配置指南 |
10.06 | Implement Cisco IOS Embedded Event Manager (EEM) | 3 | 配置指南 |
10.07 | Implement Remote Monitoring (RMON) | 1 | 配置指南 |
10.08 | Implement FTP | 6 | 配置指南 |
10.09 | Implement TFTP | 1 | |
10.10 | Implement TFTP server on router | 0.5 | |
10.11 | Implement Secure Copy Protocol (SCP) | 0.5 | 配置指南 |
10.12 | Implement HTTP and HTTPS | 0.5 | 配置指南 |
10.13 | Implement Telnet | 0.5 | |
共 172天 | |||
声明: 上述学习计划只作参考,并不保证任何考试结果。实际的学习进度和结果根据个人情况而定。
我滴那个天啊,何况现在都要改版了。。。